hallo manillio und willkommen im forum.
ich hab mal gegoogelt:
http://www.pioneer.eu/de/products/archive/PDP-507XD/page.html
dies scheint für eine flachbildschirm schon ein älteres modell zu sein (2006). digital-tuner gibt es in 3 sorten. in der ära hatten die fernseher neben dem analogen meist nur einen terrestrischen dvb-t tuner eingebaut. das was du bräuchtest ist aber ein dvb-c tuner für's kabel. (die dritte variante wäre dann sat dvb-s.)
also kommst du um einen externen dvb-c empfänger (oder gleich recorder) nicht herum...
Diese Fernsehapparatte, habe eine analog multi standard tuner, fur PAL ( keine Analogprogramme im UPC, nur Testbilden, für Teknishern), und nur DVB-T MPEG 2 SD IDTV Tuner mit CI . Keine IDTV DVB-C !
Mann mit eine DVB-C STB Kabel der UPC DVB-C empfangen mussen( UPC STB, oder frei STB DVB-C Technisat, uzw), mit digital HDMI Anschluss.
Der IDTV DVB-T ist nicht kompatibel mit DVB-T2 Sendern im Zukunft.
Diese IDTV ist kompatibel mit DVB-T im Westschweiz(Suisse Romande) Kabelnetzen mit DVB-T signal. Nicht kompatibel mit Französich DVB-T ( TNT) im Früjhar 2016( nur DVB-T MPEG 4 HD/SD), im Genfersee( Leman), Jura, und Süd Elsass( Sender Belvedere Mulhausen im Basels Umgebungen).
Der IDTV ist kompatibel mit Telerätia verschlusselt kanälen, mit Telerätia CAM und Smartcard über IDTV Common Interface.
In 2008, Pioneer habe KURO LX 5090 H, LX 6090 H mit integriert DVB-T/DVB-S2 tuner gemacht, mit SAT ACCESS HD kompatibel mit HELVITCAM und VIACCESS NEOTION SECURE CAM
2 CI
1 für DVB-S2
1für DVB-T( Telerätia CAM )
Andere Pioneer Plasma Flaschbildschirm in 2008, mit Media center mit DVB-S2/DVB-T integriert.
This TV Set have only analogue multi standard tuner for PAL B/G signal( broadcasts switched off on UPC, I beleive there are only PAL test pattern on UPC for technicans)
IDTV digital in this tv is only DVB-T MPEG 2 SD. For use with DVB-C broadcasts on UPC, you must use a DVB-C STB, with HDMI all digital transmission( dont' use SCART, picture is worse quality). DVB-C STB is provides by UPC, or you may use your own DVB-C STB, like Technisat, Humax, etc.........
Your IDTV is not compatible with future DVB-T2 broadcasts, and French DVB-T Brodcasts on air ( TNT), in Spring 2016, who will be only in DVB-T MPEG 4 H264 HD/SD, if you receive these transmitter in Lake of Geneva region, or Jura, or Süd Elsass/ Alsace du Sud, on Belvedere Mulhausen/Mulhouse transmitter in Basel Region. The IDTV is compatible with Telerätia CAM and smartcard provided by this DTT operator, with the Pioneer's CI
Telerätia using only MPEG 2 SD DVB-T scrambled broacasts.